Goodmans GMC 1034DAB, Инструкция по эксплуатации

Страница: 12 / 18

When you move the system to another part of the country, your pre-tuned DAB stations may no longer be
available and you might need to reset your system back to its original factory settings; to perform factory
reset, please do the following:
1. Unplug the unit from mains.
2. Depress and hold the SELECT button when re-connecting the unit to mains again.
3. Release the button until "System reset" displayed on the LCD.
4. The unit will perform "Autotune Full scan".
5. After the searching (around 1 minute depends on the no. of stations), press the SELECT button
together with the SEL and SEL buttons for stations.
Note: All of your stored presets will be lost once the reset has taken place.
13. FACTORY RESET
14. DISPLAY MODES
Every time you press the INFO button, the display will cycle through the following display modes:
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a
single frequency. There are national and local multiplexes, local ones contain stations that are specific to
that area.
On some occasions you will see a ">" symbol appeared after the name of the station, this indicates that
there are secondary services available to that station. These secondary services contain extra services
that relate to the primary station.
The display will show a slide bar to indicate the signal
strength, the stronger the signal, the longer the bar will
be from left to right. (F.14)
Signal strength
DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include in
their transmissions. The message usually includes information such as programme details ... etc.
DLS
F14
The time and date will be automatically updated by the broadcasted information; it is no need to set the
clock manually. In the unlikely event that no clock information is received, the display will show
"<Time/Date>".
Time and date
Programme type
This describes the style of the programme that is being broadcast. If the information is not available, the
display will show "<Programme Type>".
D D
A A
B B
M M
O O
D D
E E
Ensemble/Multiplex
Signal strength
Time/Date
DLS(Scrolling text)
Programme Type
Timer status
Total tracks and time
Timer status
CD STOP MODE CD STOP MODE
CD PLAY MODE CD PLAY MODE
Current track and elapsed time
Current track and remain time
Timer status
9