Goodmans GMC 1034DAB, Инструкция по эксплуатации

Страница: 4 / 18

For your convenience a mains plug with a fuse has been fitted to this appliance. For your safety please
observe the following.
1. Should the fuse fail in the plug remove the plug from the wall socket and replace the fuse with a 3 Amp
ASTA approved to BS1362.
2. Never use the plug without the fuse cover fitted. Replacement fuse covers are available from your
dealer or most electrical retail
Outlets.
3. IF the mains plug is cut off from the cable, rewire the replacement plug in accordance with the
instruction given in this manual.
4. Under no circumstances should the discarded plug be inserted into the mains socket. To CAUTION:
prevent a sock hazard carefully dispose of the discarded plug. Do not leave the plug lying around where
children might see it.
WARNING: To prevent fire of shock hazard , do not expose this unit to rain or moisture.
CAUTION: DANGEROUS VOLTAGES EXIST INSIDE THIS UNIT, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
DISCONNECT FROM MAINS SUPPLY WHEN NOT IN USE.
MAINS PLUG WIRING DETAILS
accordance with following wiring codes:
The wires in this mains lead are coloured in accordance with
thefollowing wiring codes:
Blue-------------------------------------------Neutral
Brown-----------------------------------------live
The wires in this mains lead must be connected to the
terminalsin the plugs as follow:
Blue Wire-----------------------------------N or Black
Brown Wire---------------------------------L or Red
Only a 3 Amp fuse should be fitted in the plug or a 5 Amp fuse
atthe distribution board.
WARNING: UNDER NO CIRCUMSTANCES MUST THE LIVE OR NEUTRAL WIRES BECONNECTED
TO THE EARTH TERMINAL IN A 3-PIN MAINS PLUG.
This symbol means that this unit is double insulated.
An earth connection is not required.
CAUTION
CLASS 1 LASER PRODUCT
Use of Controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CLEANING
Always disconnect unit from power supply before
attempting to clean it. Use soft cloth moistened with
soapy water, wipe gently.
Do not use solvents or abrasive material.
LASER SAFETY
This unit employs a laser. Only qualified service
personnel should attempt repair.
DANGER: INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK FAILED OR
DEFEATED. AVOID DIRECT EXPOSURE TO
BEAM.
CAUTION: HAZARDOUS LASER RADIATION
WHEN OPEN AND INTERLOCK DEFEATED.
1. IMPORTANT SAFEGUARD
1
Goodmans product Information Helpine 08708730080