Good Will Instrument GKP-2302, Руководство пользователя

Страница: 76 / 249

GKP-2302 User Manual
62
When branch setting is on, the execution transitions to the
specified step according to the branch operation or the signal.
When sequence stop operation is executed, the execution
transitions to step No. 0.
Transitions to the
branch step
Transitions to step No. 0
=End of sequence
Figure 4-6 Branch Operation/Stop Operation
4.2.5 Edit a Sequence
--------
Notes
----------------------------------------------------------------------------------------------------------------

A sequence being edited is kept per AC/DC mode. If AC/DC mode is changed, the edited
contents of sequence are loaded based on the change.

When the power is turned off, edited contents of the sequence are cleared, and all
sequences have the default setting values when it is started next time. To keep the edited
contents of sequence, save them in the Sequence Memory (see
4.2.8
).
 When the sequence is loaded from Sequence Memory, the sequence being edited at that
time is discarded.
 The output can also be turned on from the Sequence Edit View. The output will be set to
step No. 0 when compiling the final sequence. (see 4.2.7)
---------------------------------------------------------------------------------------

Transit to Sequence Edit View
Press the MENU key to open the root menu, then select [Sequence] (see
3.3.1
). While the
Sequence Control View is displayed, if you push [Edit] soft-key, the execution transitions to the
Sequence Edit View.
Sequence
icon

Edit a sequence
1. Push [Osc] soft-key on Sequence Edit View, then select AC/DC mode and 100 V/200 V
range. To edit the saved sequence, load the sequence (see
4.2.6 ).