Good Will Instrument GKP-2302, Руководство пользователя

Страница: 128 / 249

GKP-2302 User Manual
114
--------
Notes
----------------------------------------------------------------------------------------------------------------

Executing [Save] saves all the settings from CLP1 to CLP3 into the internal memory.

Settings not saved in the internal memory are lost when the power is turned off.

The clip ratio setting value and the crest factor setting value are held independently of
each other. The setting value switch as the Type is changed. Each setting value is saved
per waveform when the settings are saved into the internal memory.

The clipped sine wave memory cannot be cleared (to the factory defaults). Manually set to
the factory default settings of Clip = 100%, CF = 1.41, Type = Clip, then save them.
---------------------------------------------------------------------------------------------------------------------------------
4.7 Outputting Arbitrary Waveform
4.7.1 Basics
Arbitrary waveform can be selected as the output waveform with this product. Using the
example code in the programming manual, you can create, edit, and transfer arbitrary
waveforms to this product's internal memory through the USB interface only. Alternatively,
you can create and save the arbitrary waveform data in a USB memory and then transfer it to
the internal memory of this product through this product's panel operation. Up to 16 types of
arbitrary waveforms can be saved in the internal memory.
--------
Notes
----------------------------------------------------------------------------------------------------------------

Arbitrary waveform cannot be created and edited through the panel operation of this
product.
---------------------------------------------------------------------------------------------------------------------------------
4.7.2 Arbitrary Waveform Creation Procedure
See the programming manual.
4.7.3 Arbitrary Waveform Creation Example
See the programming manual.
4.7.4 Transferring Arbitrary Waveform

Transfer procedure using USB memory
1. Save the waveform data file (extension ARB) created with the control software, to the
GW_TOOL\GW_GKP2\ARB_DATA folder of the USB memory.
--------
Notes
----------------------------------------------------------------------------------------------------------------
 This product does not support the double-byte characters (e.g. kanji, hiragana). The file
name should consist of one byte alphanumeric characters.
 When the GW_TOOL\GW_GKP2\ARB_DATA folder does not exist in your USB memory,
first connect the memory to this product. The GW_TOOL folder is automatically created