69074
Goobay® by Wentronic GmbH
Pillmannstraße 12 | 38112 Braunschweig | Germany
REV2021-03-02
V1.0aw
CAT 5/5a/6 / USB 2.0 Converter
1 Safety instructions
The user manual is part of the product and contains im-
portant information for correct use.
• Read the user manual completely and carefully be-
fore use.
The user manual must be available for uncertainties
and passing the product.
• Keep this user manual.
Notes for network separation
The product has no power switch and may be used
only in easily accessible outlets to quickly remove it in
an emergency and after use.
Voltage-free only with pulled plug.
• In case of emergency, during thunderstorms and af-
ter use, pull the product on its plug housing! In case
of emergency, during thunderstorms and after use,
pull the product on its plug housing!
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.
A defective device may not be put into operation,
but must be disconnected from mains and protected
against further use.
• Use product, product parts and accessories only in
perfect condition.
• In case of questions, defects, mechanical damage,
trouble and other problems, non-recoverable by the
documentation, contact your dealer or producer.
• Do not repair defective products yourself, but con-
tact the dealer or the manufacturer.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation
against accidental use.
• Avoid stresses such as heat and cold, moisture and
direct sunlight, microwaves, vibrations and mecha-
nical pressure.
• Install the system and devices attached to it in a
way that persons cannot be injured, or objects not
be damaged for example by dropping or stumbling.
2 Description and function
2.1 Product
This product is used to extend a USB data connection
up to 100 m via a network cable. It is suitable for con-
necting USB end devices such as a mouse, keyboard,
printer or hard drive.
2.2 Scope of delivery
Transmitter, Receiver, Power supply unit,
User Manual
2.3 Specifications
Article number
69074
Transmitter
Connectors
RJ45 socket,
USB-A 2.0 plug
Receiver
Connectors
RJ45 socket,
USB-A 2.0 socket, DC socket
Input voltage,
Input current
5.0 V , 1.0 A max.
Data transmissi-
on rate
480 Mbit/s
Operating
systems
Windows 2000, Windows XP,
Windows Vista, Windows 7,
Windows 10, MAC OSx or higher
Dimensions
Transmitter
Receiver
272 x 30 x 20 mm
245 x 30 x 20 mm
Total weight
85 g
Power supply unit
Connections
Euro plug (type C, CEE 7/16),
DC plug (3.5 x 1.35 mm)
Input
100-240 V , 50/60 Hz,
0.3 A max.
Output
5.0 V , 1.0 A, 5.0 W
Average active
efficiency
74.5 %
No-load power
consumption
0.08 W
Dimensions
44 x 23 x 70 mm
Weight
50 g
Cable length
1.1 m
2.4 Operating Elements
1
RJ45 socket
2
Power LED
3
USB-A 2.0 plug
4
USB-A 2.0 socket
5
DC socket
6
Euro plug
7
DC plug
3 Intended use
We do not permit using the device in other
ways like described in chapter „Description
and Function“ or in the „Safety Instructions“.
Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions
might cause fatal accidents, injuries, and damages to
persons and property.
4 Preparation
1. Check the scope of delivery for completeness and
integrity.
2. Compare the specifications of all used devices to
ensure compatibility.
5 Connection and operation
5.1 Connection
1. Connect the USB-A 2.0 plug of the transmitter unit
to a USB port (USB 1.0/1.1 or 2.0) of your computer.
2. Connect your USB end device to the receiver unit
via the USB-A 2.0 socket.
User Manual
EN
Subject to change without
notice.
- 3 -
