Notes, Safety Notices and Warnings
The symbols and abbreviations defined below may appear on the packing material, on the unit name
plate or in the operating instructions:
In-vitro diagnostic device
This product meets the requirements of
EEC Directive 98/79 relating to in-vitro
diagnostic devices.
Attention (refer to documentation)!
Please follow the safety notices of the user
guide.
“Use by …” The date that follows indicates
the expiration data as
year-month
.
Appears beside the name of the product
batch.
REF
Item number or order number
The following pages provide a step-by-step introduction to using, maintaining and servicing the
measurement device. Passages requiring special attention are marked as follows:
This symbol warns of the danger of
corrupting measurement results, for
example, by improperly using measuring
vessels.
This symbol warns of the danger of
damaging the unit or the measurement
system, for example, as a result of improper
servicing.
)
Note or tip.
Subject to errors and technical changes.
The information contained in this document may be changed without prior notice.
© 2006 Gonotec Gesellschaft für Meß- und Regeltechnik mbH. All rights reserved.
Reproduction of this document in any form is permissible only with the prior written consent of Gonotec Gesellschaft für Meß-
und Regeltechnik mbH.
The trademarks used in this document, GONOTEC, OSMOMAT and
OSMOREF
,
are trademarks of
Gonotec Gesellschaft für Meß- und Regeltechnik mbH.
Other trademarks and trade names used in this document may be trademarks or names of the corresponding companies or
their products. Gonotec Gesellschaft für Meß- und Regeltechnik mbH does not assert any claim to trademarks or trade names
other than its own.
OSMOMAT
®
auto model, series 2005 and later
October 2009
Version 1.1
