8
7. Bottom tweeter mounting.
For each speaker you will need:
- 1 bottom tweeter (Tweeters)
- 4 plastic translucid feet
(Tweeters)
- 1 fake piece of wire
(Tweeters)
- 1 arm among the shortest
(Frame)
- 1 frame rectangular arm holder (Tweeters)
- 1 cylindrical head screw (Tweeters)
- 2 flat head screws (Tweeters)
- 1 threaded bar
(Tweeters)
- 1 molette
(Molettes)
Take 2 plastic translucid feet. Insert one, in the corresponding lodgement, around
the wire coming out of the top of the top woofer. Take the other, put the fake piece
of wire inside it, and insert it in the other lodgement.
To mount the arm (attention there is right and left) on the frame assembly, mount,
first, in the corresponding hole of the oblique legs, the frame rectangular arm
holder, using one cylindrical head screw. (The corresponding hole is the lowest
one accessible of the two inside holes which are located on the right oblique leg
for the right speaker and the left oblique leg for the left speaker.)
The rectangular part must have the two holes at the back (when the speaker is
seen from its front).
Then attach the (marked right or left depending on speaker) arm on it with 2 flat
head screws without tightening.
Warning :
This operation must be carried out by two people to avoid that the arm
fall on the woofer section and damage the painting.
Pick the correct bottom tweeter(right or left). Place it so that the wire coming from
the woofer passes through the tweeter section from bottom to top, so that the
plastic feet are inserted in their lodgement in the tweeter section and so that the
pointed foot is inserted in the groove located on top of the woofer section.
Put the other 2 plastic feet around the cables coming from the top of the tweeter
section.
Insert, screwing, the threaded bar in the cylindrical lateral part of the tweeter
section, through the arm.
When the tweeter is well installed, and with one person still holding the arm to
avoid that the tweeter lose its balance, screw one molette and secure it, as well as
the two flat head screws holding the arm.
