11
10. Midrange crossover connection.
The cables coming from the different sections as well as the cable coming from
the midrange section back panel have to be connected to the crossover
connection bar (See figures 2). This bar is located inside the back openning of the
midrange section.
Warning : The two cables coming from the lower part of the system (the bottom
tweeter and the bottom crossover) can easily be mixed up. Be careful: these
cables have to be connected in a different way acording to the speaker (See fig.
2a 2b).
Warning : Do not switch the right and left midrange back panels. The Goldcube
lodgement must be aligned with the speaker center line which corresponds to the
pointed feet line. It is exactly located above the golden identification plate at the
top of the woofer section.
When all connections are properly tightened, put the back panel of the midrange
sections back into position.
11. Grill cloth mounting.
You may now remove all driver protections with great care.
Each woofer is secured during transport by two wooden blocks, attached inside
the lateral vents behind the front panel. Unscrew these two plates from each
woofer section and slide them out carefully. Keep them with the packaging for any
further transport of the speakers.
Open the last carton marked Grillls. Mount the grills on each speaker by simply
inserting them in location.
If a grill seems too tight, try to exchange it with the one of the other speaker.
