7
III. Component Labeling
POWER
Power Cord
HT1, HT2, HT3, HT4
Emitter (heater) power cords
LIGHT
Reading lamp connector
ROOF LAMP Roof lamp connector (optional)
COLOR LAMP Color lamp connector (optional)
CTRL Control panel connector
CD/SIG
For CD/temperature sensor/buzzer/etc. connectors
CD-POWER
CD/radio power connector FAN-
POWER
CD/radio fan power connector
ANALOG AUDIO
Audio frequency signal connector
L/SPEAKER
Left speaker connector
R/SPEAKER
Right speaker connector
BUZZER
Buzzer connector
TEMP SENSOR
Temperature sensor
IV. Buckles
A. External Buckles
The external buckles are used to connect the LEFT and RIGHT SIDE REAR PANELS to the
REAR PANEL. (see figure 5)
Figure 5
B. Guide and Guide Inserts
The guide and guide inserts are used to connect the FRONT PANEL to the RIGHT SIDE FRONT
PANEL and the LEFT SIDE FRONT PANEL. Furthermore, the guide and guide inserts are used
to connect the RIGHT SIDE FRONT PANEL to the RIGHT SIDE REAR PANEL. This is also the
case for the LEFT SIDE FRONT PANEL and the LEFT SIDE FRONT PANEL. (see figure 6)
