8
Figure 6
V. Panel Descriptions
For easier installation, please understand and distinguish the differences between each panel.
A. Floor Panel
When the floor panel faces upward, you will find (6) raised moldings with (2) notches. The
notches are on the left and right sides of the floor panel. The front of the floor panel has the (3)
short angles.
B. Understanding The Difference Between The Top And Bottom Of The Wall Panels
The (2) side panels are in the upright position when the vertical slots (for the heating emitter panel
below the bench) align with the notches on the floor panel. The rear panel is in the upright
position when the horizontal bench guide is closer to the bottom of the rear panel than the top. As
for the front panel, the control panel is located at the top of the panel. The right and left front side
panels have directional stickers indicating the top.
C. Understanding The Difference Between The Inside And Outside Of The Rear Panels
You will find that the outside of the panels have a slight gloss finish and the inside does not.
Assembly Instructions
A. Choose a good location to install the sauna
1. The location must be dry, leveled, and away from any source of water
2. MAIN POWER cord must be easily accessible
3. Two adults are required for installation
4. Wood cabin installation order: Floor Panel Rear Panel Left Side Rear Panel Right Side
Rear Panel Left Side Front Panel Right Side Front Panel Front Panel Bench Emitter
Panel Bench Roof Panel Roof Cover
5. Tools Required: Philips Screwdriver and Ladder
