![Golden Designs GDI6272 Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/golden-designs/gdi6272/gdi6272_owners-manual_2240850015.webp)
13
L. Putting on the ROOF COVER
1. Place the ROOF COVER over the top of the sauna. Take care in pulling the power cord through
the hole in the roof cover. Slide the antenna through the slot allotted. Gently place the ROOF
COVER onto the ROOF PANEL. When the edges are aligned, screw the ROOF COVER to the
roof panel. (see figure 23 and figure 24)
Figure 23
Figure 24
M. Optional Shelf
1. If your sauna comes with the optional shelf, use the two screws provided to mount the self on
either the side panels or front panel.
Operating the Sauna
NOTE: Before the sauna is turned on, remove plastic protective covering from the CONTROL PANELS.
Please check and confirm that the connections to the POWER SUPPLY, HEAT EMITTERS, CD/RADIO,
and TEMPERATURE SENSOR are connected properly. The power supply voltage and frequency must
match the requested voltage and frequency of the sauna (120VAC 15AMP Dedicated Circuit or 120VAC
20AMP Dedicated Circuit).
Since many materials absorb the infrared rays, minimal clothing is recommended for maximum effect.
The infrared sauna emitters are designed to heat you and not necessarily the air inside the sauna. It is
not a hot box like a traditional sauna. The temperature gauge is a guide for your safety. It is
recommended that you drink water before, during, and after sauna use to prevent dehydration since
body fluids will be lost through perspiration. It is not recommended to shower after use since the pores
in your skin will be open and could possibly absorb anything in the water.