![background image](http://html.mh-extra.com/html/goldair/gd215/gd215_operating-instructions-manual_2239883007.webp)
Drain spout
Drain hose
Operating Your Dehumidifier
TANK FULL INDICATOR
When the water tank is full, the TANK FULL light will illuminate and the unit will stop
working until the water tank has been emptied and correctly replaced. The appliance
will continue dehumidifying when the compressor automatically restarts after
approximately three minutes.
DEFROST
Occasionally the refrigerant around the motor can become very cool, this will cause the
unit to go into defrost mode. The compressor will turn off and the fan will continue to
run. The DEFROST indicator light will illuminate on the control panel.
This is a normal function for the appliance and cannot be controlled by the user.
Once the unit has completed defrosting, the compressor will turn back on and continue
to dehumidify.
PERMANENT WATER DRAINAGE
It is possible to connect a drainage tube (not supplied) to the appliance for permanent
water drainage.
If this option is desired, you will need to purchase a suitable PVC tube from your local
hardware retailer (Goldair does not hold tubes as spare parts).
Connect the drainage hose to the drain spout. Place the end of the drainage hose in a
drainage outlet. Ensure that the end of the hose is lower than the drain opening,
otherwise the water will not drain and flooding may occur.
Also ensure the water tank is positioned in the unit otherwise the continuous drainage
will not operate. It will also catch any overflow.
When you no longer wish to use the permanent water drainage, disconnect the
drainage tube from the device and water will be collected in tank again.
Содержание GD215
Страница 1: ......
Страница 2: ...This page is intentionally left blank ...
Страница 11: ...This page is intentionally left blank ...
Страница 12: ......