Goldacres Windrow MY18 2500L, Руководство оператора, Страница: 69 / 74

Chapter 12 - Optional Accessories - 63 Windrow 2500L Operator’s Manual MY18 - REV 1
Engine
ENGLISH
3
COMPONENT & CONTROL LOCATIONS FEATURES
OIL ALERT
®
SYSTEM (applicable types)
‘‘Oil Alert is a registered trademark in the United States’’
The Oil Alert system is designed to prevent engine damage caused
by an insufficient amount of oil in the crankcase. Before the oil
level in the crankcase can fall below a safe limit, the Oil Alert
system will automatically stop the engine (the engine switch will
remain in the ON position).
If the engine stops and will not restart, check the engine oil level
(see page 8) before troubleshooting in other areas.
CIRCUIT PROTECTOR (applicable types)
The circuit protector protects the
battery charging circuit. A short
circuit, or a battery connected with
reverse polarity, will trip the circuit
protector.
The green indicator inside the circuit
protector will pop out to show that the
circuit protector has switched off. If
this occurs, determine the cause of
the problem, and correct it before
resetting the circuit protector.
Push the circuit protector button to
reset.
FUEL FILLER CAP
FUEL TANK
OIL DRAIN PLUG
ELECTRIC STARTER
(applicable type)
OIL FILLER CAP/DIPSTICK
RECOIL STARTER
AIR CLEANER
MUFFLER
SPARK PLUG
STARTER GRIP
ENGINE CONTROL TYPES
FUEL VALVE LEVER
CHOKE LEVER
EXCEPT ELECTRIC STARTER
TYPES
ENGINE SWITCH
THROTTLE LEVER
CHOKE LEVER
(air cleaner low profile type)
ELECTRIC STARTER TYPES
ENGINE
SWITCH
CIRCUIT
PROTECTOR
CIRCUIT
PROTECTOR
ON
OFF
37Z4V6100.fm 3 ページ ２０１８年１０月４日 木曜日 午後１時５４分
Where fitted, a Honda GX200 motor is used to
drive the spray pump. The motor has a peak power
output of 6.5 hp. It may be optioned with an electric
starter. This section provides a basic overview of
motor features and operation only. For detailed
safety, operating and maintenance instructions
specific to this motor consult the Honda owner’s
manual supplied or find a copy online.
Engine Safety
• Understand the of all controls and learn how to
stop the engine quickly in case of emergency.
• Do not allow children to operate the engine.
Keep children and pets away from the area of
operation.
• Your engine’s exhaust emits poisonous carbon
monoxide. Do not run the engine without
adequate ventilation, and never run the engine
indoors.
• The engine and exhaust become very hot during
operation. Keep engine away from flammable
materials and do not place anything on engine
while it is running.
Preoperational Safety Check
1. Look around the underside of the engine for signs
of any oil or fuel leaks.
2. Remove any excessive dirt or debris, especially
around the muffler and recoil starter.
3. Look for signs of damage.
4. Check that all shields are in place, and that all nuts,
bolts and screws are tightened.
Pre-operational Maintenance
Check
1. Check engine oil level. Running with low oil can
cause damage.
Where fitted, the oil alert system will
automatically stop the engine before the oil level
becomes critically low.
2. Check reduction gearbox oil level. Sufficient oil
level is essential to maximise gearbox life.
3. Check air filter element and clean or replace as
necessary to allow clear airflow to the carburetor.