manualshive.com logo in svg

Goldacres Windrow MY18 2500L, Руководство оператора, Страница: 39 / 74

Поделиться
Скачать
Goldacres Windrow MY18 2500L Скачать руководство пользователя страница 39

Chapter 8 - Operation -

 33

Windrow 2500L Operator’s Manual MY18 - REV 1

IN-CAB SECTION CONTROL WITH ELECTRIC 
PRESSURE REGULATION

The 2500 L sprayers come fitted standard with a 

simple electronic control box for spray control. It 
allows for on/off control of individual boom sections 
via the individual switches, or on/off control of all 
boom sections simultaneously via the master switch.  
The pressure regulation is electrically controlled 
via the control box too with an increase/decrease 
switch.

It is important that the console is mounted in 
the cabin in such a way that it cannot become a 
projectile in the event of sudden braking or an 
accident or if the sprayer is disconnected from 
the towing vehicle. The two bolts at the base of 
the control box are designed to provide adequate 
mounting to a bracket within the cabin. The master 
switch controls all boom valves simultaneously and 
the individual boom switches provide independent 
control of the boom valves.

Connect the two 7-pin trailer plugs together in 
order to be able to control the boom valves.

Connect the battery wires directly to a 12 V battery. 
Do not connect to any other voltage line. Attach the 
red wire (positive) to the positive terminal and the 
black wire (negative) to the negative terminal. Secure 
the battery wires with plastic cable ties. 

Do not tie the battery wires close to the existing 
battery leads or any other electrical wiring. If using 
two 12 V batteries e.g. two batteries in parallel, it 
is best to utilize the power as supplied by both 
batteries. Connect to positive terminal on battery 
supplying starter motor and negative terminal on 
other battery. Otherwise it is best to alternate the 
battery being used each day so that one battery is 

not drained completely flat.

The pressure regulating valve is used to alter 
the maximum spray delivery pressure. Screw in 
the pressure regulating valve (turn clockwise) to 
increase the delivery pressure. Unscrew the pressure 
regulating valve (turn counter clockwise) to decrease 
the delivery pressure. The pressure regulating valve 
can also be used as a pressure relief valve if an 
alternate method of controlling the pressure is used. 
In this capacity, the relief valve provides relief when 
the pressure exceeds a pre-determined value. 

If the regulating valve is used in this manner, it must 
be set so that the pressure can not exceed 690 kPa 
(100 PSI). This is a Goldacres factory preset. 

To check or alter this setting, turn the pump off and 
unscrew the valve right out. 

With all solenoids off, or any boom supply valves, 

close all control manifold ball valves so that all flow 

passes through the relief valve. 

Run the pump at maximum operating speed (540 
RPM) and slowly screw the relief valve in until the 
desired pressure is achieved (690 kPa). Tighten the 
nuts on the adjusting stem so that this setting is 
maintained. If the relief setting is too low, it causes 

too much flow to bypass back to the tank and it will 

limit the maximum obtainable pressure.

Manual Rate Control - Spray Controls

Above: 

In cab section control and pressure regula-

tion control box and harness.

Содержание Windrow MY18 2500L











































































Отзывы:

Нет отзывов