Gold Medal Macho Pop 2553 Series, Инструкция по эксплуатации

Страница: 16 / 43

Macho Pop Model No. 2553 Series and 2554 Series
Page 16
gmpopcorn.com
Agitator Set Collar Adjustment
The following instructions describe how to properly adjust set collars on an agitator assembly
with a fixed stir rod.
Agitator Assembly with a FIXED Stir Rod
Step 5: Adjust clearance between the bottom of
the crossbar and the lower set c ollar to 1/32”
(thickness of a dime); reference image shown.
Once adjusted, re-tighten set screw to secure in
place.
Step 6: To check for proper adjustment, make
sure the stir rod is parallel to the kettle cook
surface (it should be close - but not touching).
Step 7: Spin the agitator shaft by hand to ensure
it spins freely and is not dragging the bottom of
the kettle.
Step 8: Re-install kettle in machine.
Step 4: Adjust clearance to
thickness of a dime. Kettle Cook
Surface
Steps to Adjust Set Collars on Agitator with a Fixed Stir Rod
Set Collar w/Set Screw
above Crossbar
Lower Set Collar
Agitator Shaft
Step 5: Adjust clearance to
thickness of a dime.
Stir Rod (welded to shaft)
Agitator shown for general
image reference only (lids not
shown for clarity).
Step 1: Make sure machine is OFF and unplugged, then allow unit to cool completely before
attempting to adjust the agitator height.
Step 2: Remove kettle from machine.
Step 3: With the agitator assembly fastened to the kettle, loosen the set screw in each set collar.
Step 4: Adjust clearance between the kettle cook surface and the agitator shaft to 1/32” (thickness
of a dime); reference image shown. Once adjusted, re-tighten the set screw in the set collar above
the crossbar to secure in place.
5
Crossbar