Countertop Baker Unit
4
Mo del Series #5 021, 502 4, 5 025 , 50 38, 504 2, 50 44, 505 1, 5 055 ET
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims
should be filed immediately with the transportation company. The warranty does not cover
damage that occurs in transit, or damage caused by abuse, or consequential damage due to the
operation of this machine, since it is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold
Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Setup
Remove all packing material and tape before starting operation.
Electrical Requirements
The following power supply must be provided:
Domestic Model Series:
5021, 2042:
120 V~, 1300 W, 60 Hz
5024, 2038, 5044, 5055:
120 V~, 1660 W, 60 Hz
5025, 5051:
120 V~, 1440 W, 60 Hz
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
008_051514
A certified electrician must furnish sufficient power for proper machine operation and install
any supplied receptacle. We recommend this equipment be on a dedicated and protected
circuit. Failure to wire properly will void the warranty and may result in damage to the machine.
It is Gold Medal Products Co.’s recommendation that this machine be plugged directly into a wall
outlet. The use of extension cords is not recommended due to safety concerns, and may cause
sacrificed and/or reduced performance. Make sure cord is located to prevent a trip hazard or
unit upset.
