4) Troubleshooting:
Having difficulties with your installation. See if the information below will help.
Programming of the gogogate does not work.
- make sure your network name and password are correct. (password can be case sensitive)
- change the setting from WPA to WEP and restart the installation sequence
- Did you hear the 3 beeps after placing your phone on the GOGOGATE device? Moving your phone before the sound is heard will impact the
programming. You may have to re-start your installation by pressing “begin your installation” and “start”.
My garage door does not open:
- make sure the cables provided are connected properly on the back of your garage wall mount buttons
- make sure that the green cable adapter is inserted properly on the gogogate cable slot.
I can not see if my garage door is open or closed
- make sure you have installed the garage door sensors properly and according to the drawings provided
- make sure you have taken the battery protector tape out off the device prior to attempting to program the garage door sensors
- make sure you have entered the correct 4 digit code found on the front of the sensors when programming the app.
- make sure your wireless sensors are within range. Range is approximately
Xxx
ft or
xxxx
meters in open space. Distance maybe reduced by
interference or type of walls. Open or Close your garage door while looking at the STATUS LED on the GOGOGATE device. When you
open/close your garage door the STATUS LED LIGHT of the device should blink fast within 2 seconds.
Still having issues. No problem.. Watch our installation video at www.gogogate.com or contact us at: >>>>>>>>>>>>
Содержание Gate
Страница 1: ...USER MANUAL VERSION 7 25 07 2013...
Страница 25: ...MORE INFO WWW GOGOGATE COM...