GOGOGATE Gate, Руководство пользователя

Страница: 16 / 25

ADVANCED INSTALLATION OPTION – Recommended for installers
MODE:
Your GOGOGATE is capable of controlling many others devices such as electric blinds or sprinkler systems.
Depending on the devices you are connecting you may need to choose the transmission mode suitable for
that application. We recommend that this type of installation be completed by a professional installer.
GRG
This is the default Garage mode which enables you to open or close the garage door. One click on the
garage 1 button and the output relay of G1 closes during 5 seconds. The relay will re-open after that delay.
PUL
The PULSE mode should be used to control things like electrical blinds. It allows for continuous control
while a button is pressed. For example: If you press and hold the device 1 button to open your blinds,
the output relay G1 will remain closed (and your blinds will continue to open) until the button is released.
The same applies when you want to close your blinds. Press and hold the device 1 button. Release
button to stop.
ON/OFF
The ON/OFF mode is made to activate things like exterior lights. Under this setting, if you press and
release the device 1 button, the output relay G1 will remain closed. (ie lights will go on). If you click anoth-
er time the same button, output relay G1 will close (ie lights will turn off) .
PORT
By default, GOGOGATE uses port 8001, but, if you want to install more than one GOGOGATE in the
same Network, you can choose another port. The available ports are between 8001 and 65534.
IP SETTINGS
In advanced mode, you have to put a static IP for GOGOGATE, DHCP is disabled.
By default, in Standard settings, DHCP is enabled.