GOGOGATE Gate, Руководство пользователя

Страница: 3 / 25

1
SD Memory card Slot: The card is used to operate your GOGOGATE and also for
future Software upgrades. IT SHOULD NOT BE REMOVED while the device is powered on.
2
Cable slot: Connects the 3 pre-assembled garage cables to your garage door wall buttons.
Power outlet: Connects the 5VDC power supply to the device.
3
WiFi Port: This is where you will insert the Wireless USB adapter supplied with your product.
Once inserted do not remove. This is needed to connect to your wireless home network.
5
5 Led Indicators:
G1 , G2, G3 indicates the status of garage door # 1,2 and 3. These LEDs will display a fixed
green light when a specific door is activated.
The STATUS LED will blink green when the device is operating properly. When connecting the wireless
sensors to the GoGoGate, the status LED will blink fast twice to indicate that the GoGoGATE device is
receiving the signals from the wireless door sensors.
The POWER LED will be a solid Green light when the device is connected to the power source.
4
Left (L) and Right (r) light receiver. These light receivers are used to program all functions
of your smartphone.
6
Programming AREA: This is where you will place your Smartphone
(SCREEN FACING DOWN) to program your GoGogate device.
NOTE: your GOGOGATE has no power on/off switch. The device consumes very little power
and needs to be always on for your app to open and close your garage when you need it.
2. Understanding your GoGoGate:
1
2
3
6
7
7
4
5