30
©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the
right to amend specifications without notice or obligation.
MAINTENANCE
Maintenance intervals and action required
Interval
Action required
Items Required
After each use
–
Flush pump through
with clean water
Supply of clean water
Every 3 months -
Check oil level in
bearing housing
Remove filler/dipstick
on bearing housing to
check level
10w/40 or 15w/40
multigrade engine oil
Vacuum test
See separate
instructions on page 32
Pressure test
– for
tracing location of
vacuum leak
See separate
instructions on page 32
Access to pressurised
water source
P2 - High pressure filter
Remove the filter from
the housing and flush
with clean water
Every 12 months -
Change oil in bearing
housing
Drain oil from bearing
housing and refill with
new oil
1 litre SAE10w/40 or
15w/40 multigrade
engine oil
Change oil in gearbox -
if fitted
Drain oil from gearbox
and refill with new oil
1.2 litres BP Energol
GR XP 68 or similar
Every 2 years -
Piston primer seals in
cover and body
See Maintenance
Manual procedures
Repair kits
Special tools
(contact Godiva)
Thermal Relief Valve
Test
See separate
instructions on page 33
