15
©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the
right to amend specifications without notice or obligation.
Figure 8.
6. High pressure selector valve
– P2 model only
The position of this valve on the top of the pump allows the handle to project through an
instrument panel attached to the front of the pump. When the handle is to the right, low
pressure is available in the hose reels. With the handle to the left. high pressure is
available in the hose reels. Note: Low pressure water is available on the high pressure
outlet when high pressure is not selected.
7. Instrument panel
– optional feature
If an instrument panel is fitted some of the gauges may not already be connected. Refer
to additional gauge instructions applicable to the gauges on the panel.
If an instrument panel includes electrical connections a wiring diagram will be available.
To obtain the correct diagram please quote the pump specification and serial number.
8. Pipework for Instrumentation and Safety Devices
Vacuum and pressure gauge connection points are indicated in Figures 9-11 below. All
connections and tubing must have a minimum working pressure rating of 19 bar.
Pressure gauge connection
– on top of discharge manifold
Figure 9.
High
pressure
filter.
Remove with 38mm A/F
(1½in) spanner
High
pressure
/
Low
pressure selector lever
Pressure gauge
connection, Rp ¼”
