388134 Petit Cube
Page 6
CARE
Have your appliance checked by a qualified person at least once per year.
CAUTION
•
WHEN FIRST USING THE APPLIANCE, OPERATE IT AT A MODERATE SPEED TO ALLOW THE PARTS TO EXPAND
NORMALLY.
•
THE HANDLES ARE HOT WHEN THE APPLIANCE IS IN USE. USE THE GLOVE (if included).
•
THE GLOVE SHOULD ONLY BE USED TO OPERATE THE HANDLE. IT IS NOT SUITABLE FOR THE HANDLING OF
BURNING OBJECTS. IT IS NOT WATERPROOF. DO NOT USE WHERE THERE IS A CHEMICAL RISK.
•
AFTER USE, MAKE SURE YOU STORE THE GLOVE IN A LOCATION WHICH IS FREE FROM COMBUSTION
RESIDUE (ASH) AND AWAY FROM HEAT.
When the burner is first used, do not worry if smoke and an unpleasant smell are released the first few times, this comes from the paint on the
different parts. These phenomena can last for a few days.
Caring for the cast iron and steel
All steel or cast iron wood burners require minimum care to protect them over time at the end of winter and during the hot season. In fact,
when a wood burner is used there is no possibility of the parts composing the appliance oxidising. This can only occur during extended periods
without use.
Cast iron parts should be regularly treated using black stove paste (ref.0012). It is applied when the appliance is cold, like shoe polish, and
requires buffing with a soft cloth when dry.
High temperature paint (cast iron grey ref.0001) in a spray can can also be used to get a neater finish on the outer parts of the wood burner.
Before applying the paint, make sure you remove all traces of oxidation using fine grain sandpaper.
Full cast iron wood burners with an enamel exterior finish require the inside of the firebox to be maintained.
This operation is all the more essential for appliances installed in houses that are only occupied occasionally.
All our care products are listed in our general catalogue (stove paste, paint, window cleaning, chimney sweeping products, etc.). They are
available for purchase from our dealers.
Special warning for the door:
The shafts on our doors are fitted with cone-point set screws or brake washers.
CAUTION: If the door is to be removed by your installer (window replacement, etc.), it is important to refit the brake washers (new)
on the door and/or the original cone-point screws.
SPARE PARTS
If, after many years, some parts need to be replaced, contact your SUPPLIER, or any other PROFESSIONAL WHO
DISTRIBUTES OUR BRAND.
Give them the indications on the IDENTITY PLATE or on the WARRANTY CARD, which should be kept
imperatively, even after the warranty has expired.
The professional will have all the parts lists and technical documentation for our products and will be able to quickly
supply all spare parts and carry out the repairs.
Never use spare parts that are not supplied by GODIN S.A.
Never make any alterations to the appliance without permission.
Remember that the manufacturer’s liability is limited to the product as sold. The
installer is fully liable for the installation and commissioning according to trade
practices and the instructions in the manual.
In order to continuously improve its products, GODIN S.A. reserves the right to modify its
appliances without notice.
LIABILITY
Содержание 388134
Страница 9: ...388134 Petit Cube Page 9...
