GO Elliptical T-300PX, Руководство пользователя

Страница: 17 / 40

- 17 -
STEP 5 : Attach the Second Pedal Support Tube Assembly
(A) set the large PU roller pre-assembled with the second pedal support
tube to the center of ALUM. rail (#113) pre-assembled on the pedal
support tube (#75)
(B) fit the front "U" bracket with the pre-assembled short square swing arms
(#98)
(C) as photo shown insert both small axle (#14) thru both parts ( due to the
samll axle is in spec. if with difficulty to set it thru both parts, add nut
(#12) to outside of small axle with the hex wrench to back & forth rotate the
axle, it will be easy to put thru
(D) set washer (#11) & nut (#12) to both side of small axle as photo shown
with two tools to locking up totally.
Note! Due to the second pedal support tube is a moving part MAKE SURE!
to release both nut (#12) half to one cycle then cover the end cap (#5) and
make sure the pedal support tube be able to move up/down freely.
#12 4
#5 4
#14 2
#11 4
75
113