GO Elliptical T-300PX, Руководство пользователя

Страница: 22 / 40

- 22 -
STEP 9 : Attach the Computer Display and Rear Console Base Cover
(A) Place the computer display on to the console base #113.
(B) Run the computer wires through the console base (See Fig.12A)
(C) Connect all of the wires with the corresponding wire from the elliptical
base.
(D) Secure the computer display with 4 x #E screws taking care not to pinch
the computer wires between the frame.
(E) Tuck the excess wire into the upright post or into the back of the computer
display
(F) Secure the rear console base cover with 2 x #30 screws taking care not to
pinch the computer wires between the plastics.
(G) Completely tighten all fasteners now
#30 2
Due to console/computer will assemble with a higher Location of machine SUGGEST to have a
partner to Hold the computer and make sure all the Cable/plug Are plug in firmly or use a Chair
to stand on it to get a higher position to the console location so be more easier to make sure all
the cable /plug are plug in firmly.