GMR STENSBALLE, Руководство пользователя

Страница: 24 / 34

GMR maskiner a/s Page 24
STENSBALLE rotary mowers
Operating Instructions
GB
Maintenance and storage
Manual tilt-up
Hydraulic tilt-up
Use manual tilt-up when you need to clean the mower.
1. Lower the mower to the ground.
2. Disengage the PTO output.
3. Stop the tractor.
4. Remove the PTO shaft and place it to one side. Applies to
mechanical machines only.
5. Start the tractor and lift the hitch with the mower in the top position.
6. Tip the mower by hand into an almost vertical position.
7. Lock the mower in tilt-up position using pins through the mounting
bracket and frame. Depending on the type of tractor, it may be
necessary to turn the rear wheels so they are pointing forward.
8. Gently lower the mower to the ground, so the rear wheels are
resting on the surface.
9. Stop the tractor and remove the key before you leave the tractor
cab.
Some mowers may be equipped with hydraulic tilt-up.
1. Disengage the hydraulic PTO output.
2. Stop the tractor.
3. Remove the PTO shaft and place it to one side.
Applies to mechanical machines only.
4. Turn the lever on the switch valve to the tilt-up position.
5. Start the tractor.
6. Lift the hitch with the mower in the top position.
7. Activate the valve battery for tilt-up, and make sure the mower
moves freely and unhindered to the top position. Depending on the
type of tractor, it may be necessary to turn the rear wheels so they
are pointing forward, or to detach them completely with the wheel
forks.
8. When the mower is tipped right up, you can gently lower the mower
with the hitch so it rests on the ground.
9. Stop the tractor and remove the key before you leave the
tractor cab.
WARNING
Working under a raised mower
Never enter the space under a raised mower unless
it has sufficient support.