GMR STENSBALLE, Руководство пользователя

Страница: 21 / 34

GMR maskiner a/s Page 21
STENSBALLE rotary mowers
Operating Instructions
GB
Daily use
In case of a breakdown, proceed as follows:
1. Reduce the tractor's rpm to idle.
2. Disengage the tractor's PTO output or operating hydraulics.
3. Stop the engine before leaving the cab.
Contact your dealer if you cannot identify the cause of the breakdown.
If the mower fails during use, you must stop the tractor's mechanical
or hydraulic PTO output immediately. Then stop the tractor engine
before leaving the driver's cab. You can now inspect the mower to
find the cause.
If the centre mower has stopped, the V-belts may be slipping due to
overloading or the V-belts may need tightening.
If the mower is forced too much, the tractor's hydraulic pressure relief
valves are activated and one or both side mowers stops mowing.
If the mowing action is failing and you need to restart, proceed as
follows:
Stop the tractor's PTO immediately if the rotary mower is not running,
and contact your dealer for assistance.
WARNING
Contact your dealer if you cannot identify the cause
of the mowing failure. You risk personal injury if you
troubleshoot without thorough knowledge of the
machine and technology in general.
Breakdown
Failure
Mechanical operation
Hydraulic operation
Restart
1. Stop the tractor's PTO and run back a little.
Then attempt a restart as follows:
2. Check that the PTO output is disengaged.
3. Start the tractor and drive the mower free of the grass.
4. Engage the PTO output.
5. If the rotary mower is now running, you can continue to mow the
grass, but drive a little more slowly than before.