GMR STENSBALLE, Руководство пользователя

Страница: 12 / 34

GMR maskiner a/s Page 12
STENSBALLE rotary mowers
Operating Instructions
GB
Handling and assembly
Attaching the mower
to the tractor
3-point hitch
When fitting for the first time, remove the reusable plastic packaging.
• Check that the correct type of machine has been delivered.
• Check that the machine is complete and has not suffered damage
in transit.
• Check that the rpm and direction indicated on the PTO protection
on the angular gear are correct for the tractor (not applicable for
hydraulic machines).
Depending on the type of mower you are using, attach the mower with
either a 3-point hitch or an A-frame.
1. Drive the tractor at right angles to the mower.
2. Stop the tractor engine and PTO output.
3. Connect the hitch arms to the mower.
4. Connect the top bar to the mower.
5. Connect the PTO shaft to the tractor.
Check that the snap coupling clicks into place in both forks.
6. Attach the PTO shaft safety chains to the sides of the tractor
(mechanical machines only).
7. Connect the hydraulic hoses to the tractor using the snap couplings
(hydraulic machines only).
8. Check that the couplings are fitted so the mower rotates in the
correct direction.
9. Check the snap couplings for impurities.
Clean the couplings if necessary.