manualshive.com logo in svg

GMP G 14.25, Руководство по установке

Поделиться
Скачать
GMP G 14.25 Скачать руководство пользователя страница 34

34

G

 Line - INSTALLATION MANUAL

ROOM CHARACTERISTICS

 

WARNING!

All operations must be carried out by fully qualified engineers.

The ironer must be positioned in a well illuminated room, and ideally work in a temperature included between -10°C and 

+40°C.

VENTILATION

The ironer should be only installed in a well ventilated room.

Ventilation air intake must comply with the norms in force in the destination country.

Fresh air intake must be granted to compensate for air subtracted by exhaust motors. 

In the case of gas heated equipment air subtracted by burner functioning should be added to the calculation of make-up air.

NECESSARY FRESH INTAKE AIR FOR GAS HEATED IRONERS

Model

m³/h

G

 14.25

465

G

 15.35

-

G

 18.35

870

G

 21.35

920

G

 26.35

1 140

G

 21.50

1 835

G

 26.50

1 685

G

 32.50

2 090

Table 4

The ventilation air has to be taken directly from outside, in an area far from pollution sources, and the inflow has to be 

granted by permanent openings made on room walls facing directly outdoors. 

The calculation of the opening total free section must be done accordingly to national and local legislation. 

Furthermore, the opening must be realized so that it cannot be occluded. It must also be protected by a grille or a metallic 

wire net that does not reduce its useful section. The opening shall be located at a height near to the floor level in order not 

to create turbulences disturbing the correct functioning of fumes exhaust motor.

 

DANGER!

Do not store flammable, corrosive or chemical substances in the same room where the ironer is installed.

 

DANGER! 

To prevent risk of fire, and to avoid ironer overheating, keep the area around the machine clean from lint and dust.

Содержание G 14.25













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды