manualshive.com logo in svg

GMP G 14.25, Руководство по установке

Поделиться
Скачать
GMP G 14.25 Скачать руководство пользователя страница 13

13

G

 Line - INSTALLATION MANUAL

STEP 3

: Complete the operation making sure that the detaching linen springs and and the brass plates supporting the 

thermostat sensors are perfectly in contact with the cylinder.

 

WARNING!

Disconnect the handwheel before starting the ironer.

IMPORTANT!

Do not tear the paper, and make sure no piece of paper remains inside the ironer when heating is activated.

IF THE EQUIPMENT IS NOT INSTALLED AND USED IMMEDIATELY, IT SHOULD BE STORED IN A DRY PLACE:

• Care should be taken that condensation does not occur: if condensation occurs, cylinder will be subject to oxidation.

• In case of extreme ambient conditions during transport or storage, double-check the state of the cylinder surface looking 

for oxidation traces.

• In case of storage periods longer than 30 days, a systematic inspection schedule should be established.

• In case of oxidation, coat the cylinder with protective anti-oxidation treatment.

BRASS PLATE

DETACHING LINEN SPRING

Содержание G 14.25













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды