1OPVM26EN – April 2018
Page 17
VM26-J
Operating Instructions & Function Tests
To Position Platform from Ground
Push and hold the enable switch for the Rotate, Lift or Jib function as desired, then use the Base
Control Paddle to move the platform to the desired position.
Operation from Platform
Check the area above and around the machine for obstructions and electrical power lines before
operating the machine.
1 Turn the Key Switch to platform control.
2 Set the red Emergency Stop button to the on position at both the ground and platform
controls.
3 Be sure the battery pack is connected before operating the machine.
To Position Platform
1 Press the Lift, Rotate or Jib Function Select switch as desired.
2 Press and hold the Foot Interlock Switch on the platform floor.
3 Use the Left Control Paddle to control the Rotate function.
4 Use the Right Control Paddle to control Lift and Jib functions.
To Steer
Depending on how the turret is rotated, both Drive and Steer functions may respond unexpectedly.
Note the position of the arrows on the Drive Function Select icon before moving the Control Paddles.
1 Press the Drive Function Select switch.
2 Press and hold the Foot Interlock Switch on the platform floor.
3 Turn the steer wheels by pushing the Left Control Paddle to the right or left.
