Global Mainstream Dynamic Energy Technology Ltd.
- 34 -
User Manual
Powervortex 5200TL hybrid inverter
Figure 35 Current transformer ratio setting
CT refers to current transformer for indirect metering case. Please check the current transfer
ration listed on the current transformer label and press “OK” to modify it.
Note: Different current transformer has different current ratios, please input the right ratio. The
default value is 0001, it’s not necessary to modify this value if no current transformer is
connected in.
4.1.5.13 Setting Lithium-ion BMS Code
Press “OK” to finish this setting and you will enter the setting interface as shown in Figure 36.
Figure 36 Lithium-ion BMS code setting
BMS refers to the BMS code when adopting different lithium-ion battery in the system. If in
Section 4.1.5.3, the TYP is lead-acid, then there is no need to set this value.
The default BMS value is 00, which is for the Plyon battery. Currently, BMS and battery from Plyon
is the only one available in the standard system. So this value doesn’t need to modify.
Lithium battery type, users can ignore this option if the battery setting type is lead-acid battery.
The BMS default value is 00 which is corresponding with pylon battery.The system is only
compatible with Pylon battery protocol,so no need to do any extra setting.
Please press “▼”to enter the interface as figure 36 showed.
