Global Mainstream Dynamic Energy Technology Ltd.
- 19 -
User Manual
Powervortex 5200TL hybrid inverter
vertical, and mark screw position.
2. Remove the wall bracket, and then drill holes.
3. Hold the wall bracket in position and insert all screws.
4. Fix the wall bracket by turning the screws.
The inverter wall mounting procedure is shown below:
Figure 10 Inverter wall mounting procedure
1. Hang the inverter on the wall bracket by the following steps:
2. Move the inverter in the suitable horizon direction.
3. Make the hook on wall bracket inserting in the slot behind inverter.
4. Keep the inverter down slowly to ensure the inverter hang on the hook.
5. Check the inverter securely fixed on the wall bracket.
3.4 Electrical Connection
3.4.1 Connectors
The GMDE Powervortex 4600TL / 5200TL are provided with the following connectors, as seen
below from left to right:
PV1
PV2
GRID
LOAD
WIFI
CAN
RS485
Ethernet
BAT
SET
DRED
Figure 11 Powervortex 4600TL / 5200TL Interfaces
Communication-interface includes:
1. Ethernet/ RS 485/CAN/BAT
2. 2 pairs of PV input terminals.
3. One AC Grid connector (L1/N/G), which can connect to power grid and other load(the
