Global Mainstream Dynamic Energy Technology Ltd.
- 18 -
User Manual
Powervortex 5200TL hybrid inverter
100
1
0
0
400
4
0
0
Figure 8 Installation patterns
3.3.2 Mounting the Hybrid Inverter
Choose an adequate location and clearance. Drill holes for the mounting bracket in the wall.
There are only two steps to mount the inverter. The first step is fixing the wall bracket and the
second step is mounting the Powervortex4600TL /5200TL. All the steps are shown below by the
form of illustration.
Inverter weight and dimensions are listed as follows:
Mechanical Description
Model
Powervortex4600TL /5200TL
Dimension
610mm x 550mm x192mm
Weight
25 kg
Table 3 Information of GMDE Powervortex4600TL /5200TL
The wall bracket can be fixed to the wall by four expansion bolts (M8*12mm: thread diameter is
8mm, nominal diameter is 12mm). Select the appropriate screw types and dimensions for the
wall material is very important.
Mount the wall bracket by the following procedure:
The diagram of mounting the wall bracket is showed below:
Figure 9 Inverter wall bracket
1. Mark the position on the wall of the bracket: Hold the wall bracket to the wall, keep the sides
