38
39
5.1 Function control of the display
Every time you turn on the blood glucose
meter, all display elements appear for about
two seconds. This allows you to see whether
all display elements are working properly.
5.2 Reasons for a function check with
control solution
We recommend a check be carried out with
a control solution:
– at least once a week
–
for practicing before your first blood
glucose measurement with the
Biocomfort blood glucose meter
– after opening a new package
of test strips
Note:
To quickly scroll through the results, press the
MEM button and hold.
Remark:
By repeatedly pressing the MEM button, the
average values of the last 21 and then 28 days
are displayed. Afterwards, all stored individu-
al values can be viewed, from the second-to-
last one to the oldest available measurement.
Step 8:
To exit memory mode, switch the device off
again with the On/Off button.
Once the end of the measured value memory
has been reached, or if there are no other
measured values available, the following is
displayed:
– when you think that the meter or test strips
aren’t functioning properly
– when your blood glucose results don’t
agree with your subjective feeling of well
being
5.3 Carrying out the control measurement
The blood glucose meter function check is
carried out in the same way as a normal
blood glucose measurement except the
measuring cell of the test strip is filled with
gluco-comfort
control solution instead of
with blood.
To do this, put a drop of control solution on
one of your fingernails and then bring the
drop in contact with the measuring cell of
the test strip.
To carry out the blood glucose measurement,
see Section 3.4.
5 Function checks and caring
for the
gluco-comfort
blood
glucose meter
day
avg
mem�
mg/dL
Fu
nc
tion c
he
ck a
nd c
ar
e
5
mem�
mem�
Содержание BGM 105
Страница 28: ...54 55...