gluco-comfort BGM 105, Руководство по эксплуатации

Страница: 11 / 28

20 21
Note:
If measured value memories are enabled
for several users, each user must know his
or her own identity number. Before each
measurement, it must be made sure that
the correct user identity number has been
selected (see Section 3.2, steps 3 to 5).
The procedure for clearing the measured
value memory is described in Section 2.8.
2.6.2 Configuration of the model variant
BGM105
The model variant BGM105 is used together
with the Health Manager software and is con-
figured using the Health Manager on your PC
or PDA.
Due to data synchronisation, at least one user
must be enabled in the software on the PC or
PDA before the blood glucose meter can be
activated.
“on” means:
The measured value memory is enabled for
user 1.
“off” means:
The measured value memory is blocked for
user 1.
Step 2:
To change the measured value memory state
for user 1 from “off” to “on” or vice versa,
press the MEM button.
Step 3:
After you have set the measured value mem-
ory to the status you wish, you can set the
status for user 2 by pressing the SET button.
Remark:
If, for example, you want to change the meas-
ured value memory status for user 5, press
the SET button until the number “5” appears
to the left of the word “user” and carry out
step 2.
Step 4:
If you are finished making settings, you can
exit the settings menu by pressing the On/Off
button. Otherwise, continue making settings
by pressing the SET button.
2.7 Resetting the wireless connection (only
applies for the model variant BGM105)
Note:
The model variant BGM105 is equipped with
a wireless interface. With this, you can wire-
lessly transfer the measured blood glucose
measurements to a PC which is equipped
with a Biocomfort wireless module (USB 105)
or to a PDA (equipped with wireless module
CFC 105) for further processing (e.g. statisti-
cal evaluation) or archiving.
This setting should only be made when it’s
no longer possible to reset with the Health
Manager.
Details can be found in the software instruc-
tions.
The configuration of the wireless interface
can be found after the configuration of the
unit of measurement setting in the settings
menu sequence.
user user
user
G
et
tin
g s
ta
rt
ed
2