21
your country’s time zone. The step is half an
hour.
Daylight Time
Set “Daylight Time” option to “ON” means the
summer time is on thus local time is one hour
late than normal.
Wake Up
If you set “Wake Up” option to “Enable”, you
activate a wakeup timer. The service list will be
displayed for you to set first view service using
UP/DOWN button.
Wake Up Time
Only if you set “Wake Up” option to “Enable”,
“Wake Up Time” is active for you to set wakeup
time using UP/DOWN button.
Sleep
If you set “Sleep” option to “Enable”, you
activate a sleeping timer.
Sleep Time
Only if you set “Sleep” option to “Enable”,
“Sleep Time” is active for you to set sleeping
time using UP/DOWN button.
A/V Control
You
can set SCART, screen ratio and TV format,
Video picture parameters in this menu
according to the TV set connected to the
receiver. Please use UP/DOWN button to select
one of the following items and press
LEFT/RIGHT or OK button to set certain value.
Details are as the following:
TV-SCART
Set the video output mode for the TV SCART
(RGB, CVBS).
VCR-SCART
Set the video output mode for the VCR SCART
(CVBS only).
Screen Ratio
Set the screen aspect ratio of the TV set
connected to this receiver (Auto, 16:9 Full, 4:3
Full, 16:9 Letter Box or 4:3 Letter Box).
TV Standard
Set the format of the TV set connected to this
receiver (AUTO, PAL, NTSC, or SECAM). In
AUTO mode, the receiver set the format to the
one same as service viewed before enter this
menu, and automatically follows current
service’s format whenever current service’s
stream format changes.
Video Brightness
Set the video brightness for receiver output. It
ranges from 1 to 8, and is independent of the
TV set connected to the receiver.
Video Contrast
Set the video contrast for receiver output. It
ranges from 1 to 8, and is independent of the
TV set connected to the receiver.
Video Saturation
Set the video saturation for receiver output. It
ranges from 1 to 8, and is independent of the
TV set connected to the receiver.
UHF Setting
You can set UHF parameters in this menu
according to the TV set connected to the
receiver. Please use UP/DOWN button to select
one of the following items and press
LEFT/RIGHT or OK button to set certain value.
Details are as the following:
UHF Channel
