9
9. GETTING STARTED
Easy Install
Press the POWER button to operate the
receiver from “Standby” mode. If you did not
install it before, the “Easy Install” Menu will be
displayed automatically to guide you to install
your box and dish.
*Notice: There are two parts, Box Setting and
Install Setting. Please follow the indication in
this menu one step by one.
Box Setting
Language
Choose Menu Language. Go to next
.
Time Setting
Set Current Time. Go to next
.
Parental Control
Set Password, Receiver Lock and Censorship
Classification. Go to next to enter in Install
Setting.
Install Setting
Choo
se one from the following items: “Install your
dish”, “Automatic install satellite and search
channel” and “Manually install satellite and
search channel”.
Install your dish
a. Install one satellite, Press RED button to
edit it. In edit menu you can check signal.
This function is very useful for installing
your dish. It will automatically calculate the
elevation and azimuth for certain satellite
according to the local longitude and latitude
you entered. Set the longitude and latitude
by pressing 0~9 and LEFT /RIGHT button,
and you get the elevation and azimuth
information from the menu. Then go to next.
b. Adjust your dish depend on the intensity
and quality. Press RED button to edit
satellite as above, press OK button to select
TP. Go to next.
c. Adjust your dish depend on the SNR and
BER. Press RED button to edit satellite as
above, press OK button to select TP. Go to
next.
d. Choose one from the following items:
“Install another satellite” and “Complete
installing dish and search channels”. For
“Install another satellite”, you need to install
another satellite the above step by step. For
“Complete installing dish and search
channels”, you need to set the Scan Mode
and Network, then press OK button to do
scan.
