18
In this menu, you can press LEFT/RIGHT key
to select the Region and set the “Antenna
Power” on or off.
CA Settings (OPTIONAL)
Receiver has build in smart card module with
CONAX system. By using cards in this system
provided by operators, it is possible to watch
many scrambled channels coded in this system.
This menu shows detailed information about
card inserted into card reader module. It allows
to check all available information about card
inserted according to help messages visible on
the bottom of the screen.
NOTE:
All information showed in this menu and
submenu are coming from inserted card. In
case if anything is wrong, it could be card
problem. After inserting the card correctly at any
time, a message-box will show on the screen
with message about detecting the card, in “Card
Info” menu all available information will be
displayed.
Factory Default
Factory default
Press OK button to load default data to current
database.
Press MENU/EXIT button to abort the
operation.
Factory reset
Press OK button to do factory reset, which will
recover all database to the same as factory
default settings, then it will automatically go to
“Easy Install” menu to re-install your system.
Press MENU/EXIT button to abort the
operation.
Set data to factory default data
