Globe S13E Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 24

Globe S13E Скачать руководство пользователя страница 8

Page 8

Installation

THIS MACHINE IS PROVIDED WITH A SCHUKO GROUNDING PLUG. THE OUTLET TO

WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE IS

NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN (Fig. 8-1).

IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, A

SERVICE AGENT OR SIMILARY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD.

5. Inspect slicer to make sure all parts have been provided.

6. Make sure knife cover and knife sharpener are in place.

7. Make sure warning labels are properly positioned and legible and the instruction manual is available near

slicer.

8. Post the provided wall chart in a visible area near slicer. Refer to the wall chart and the Owner’s Manual

for proper cleaning, sanitizing and inspection of the slicer.

9. Refer to the procedures outlined in the Cleaning & Sanitizing section to clean the slicer before use.

10. Contact your local representative, if you have questions or problems with the installation or operation of the

slicer.

Figure 8-1 Schuko Receptacle

«
...
6
7
8
9
10
...
»

Содержание S13E

























Отзывы:

Нет отзывов