Global Hobby Phase 3 Pitts, Инструкция по эксплуатации

Страница: 9 / 16

9 Continued On Next Page
☛ ☛
☛ ☛ ☛
STEP # 6: INSTALLING THE WHEELS AND WHEEL PANTS
❑
Slide one carbon axle into the axle mounting bracket.
❑
Slide one wheel (flat side first) onto one wheel pant mounting bracket.
❑
Firmly push the carbon axle into the wheel pant mounting bracket to
secure the assembly together.
☞
Check that the wheel spins freely.
❑
Repeat the previous procedures to make a second wheel and axle
assembly.
❑
Glue the inner wheel pant section to the outer wheel pant section.
✦ ✦ ✦ ✦ ✦
IMPORTANT
✦ ✦ ✦ ✦ ✦
Make two wheel pants - one right and one left.
❑
Glue the wheel pant mounting bracket to the inside of one wheel
pant. The base of the bracket (the straight side) should be even with
the bottom of the wheel pant and the wheel should be centered from
side to side.
❑
Install the second carbon strut and mounting brackets.
✦ ✦ ✦ ✦ ✦
IMPORTANT
✦ ✦ ✦ ✦ ✦
When you align the second carbon strut, make sure
that the ends of both struts line up with each other.