15
❑
Use the template to cut out the motor mount from a piece of 1/8"
plywood (not included).
INSTALLING THE KMS 2410-9 BRUSHLESS MOTOR
❑
Slide the motor mounting stick into the fuselage. You may need to
cut the stick shorter so that it's flush with the front of the fuselage.
❑
Center the motor mounting stick and double-check that it is straight.
When satisfied with the alignment, glue the motor mounting stick to the
fuselage.
❑
Mount the motor to the motor mounting plate, using the hardware
provided with the motor.
❑
Glue the motor mounting plate to the motor mounting stick and the
front of the fuselage.
BALANCING AND CONTROL THROWS CAN
BE FOUND ON THE BACK PAGE
We stock replacement parts for your Phase 3 airplanes. Listed below are the replacement parts that are available along with their
respective part numbers for easy ordering convenience. We suggest ordering directly from your local dealer.
If your dealer does not stock Phase3 products, you can order replacement parts
directly from us, using the Customer Service Information on page # 2.
REPLACEMENT PARTS
Ultimate - Complete ....................................................... 107012
Pitts - Complete ............................................................. 107011
Brushed ESC for 2 Cell LiPO ........................................ 109109
Motor and Gear Box ...................................................... 109111
Propeller ......................................................................... 109112
Gear Box Only ............................................................... 109113
Main Gear and Shaft Only for Gear Box ....................... 109114
Landing Gear Assembly ................................................ 109115
Control Horn and Clevis Bag ......................................... 109116
Carbon Support Strips (4) .............................................. 109117
2 Cell 1250mAH LiPO Battery ....................................... 128755
Quattro LiPO Charger .................................................... 158370
