Global Fire Equipment //
globalfire.pt
ma_oexv2_01_010001_en_180730
PANEL STATUS INDICATORS & CONTROLS
STATUS
FIRE
– LED used to indicate any FIRE ALARM condition present on panel.
FAULT
– LED used to indicate any Fault condition present on panel. If there is a communication Fault between ORION-EX
and an ORION MINI REP or a Sounder / Relay module, this LED will flash at a rate of once per second.
DISABLED
– Disabled Status LED used to indicate that the panel has features that have been disabled.
TEST
– This LED is active whenever panel is in TEST MODE, activated in Engineering Mode Access Level 3 only.
SUPPLY
- Multi function indicator used to indicate the presence of supply. When in Access Level 1 this
LED is permanently lit. If in Access Level 2 (USER CODE 2244) this LED will flash at a rate of once per second.
If in Access Level 3 mode (ENGINEERING CODE 4321) this LED will flash faster at a rate of once every 0,5 seconds.
SYSTEM FAULT
– This LED will be lit whenever there is a processor failure or corruption of the panel firmware.
4
