Once you have completed the desired number of turns
secure the set screws on the spring block to the shaft.
Remove the winding bars.
WARNING: Always ensure that your body and face are
to the side of the winding bars. Refer Fig. 23.
Congratulations you have now successfully commissioned
your panel glide sectional overhead garage door. If installing
an automatic operator please refer to Glidermatic
GTS
installation instructions.
Warranty
A. The manufacturer, Gliderol Garage Doors Pty Ltd (the
Manufacturer), a division of Gliderol International Pty Ltd, of 32
Jacobsen Crescent, Holden Hill, South Australia, 5088 warrants
to the original purchaser (the Vendee) that the Panel·Glide (the
Unit) including every major component thereof will be free from
defects in materials and workmanship in normal operation for
a period of twelve (12) months from the date of installation
where installation is effected by the Manufacturer or one of its
Authorised Distributors or otherwise from the date of purchase.
B. (1) Where the door has been installed by the Manufacturer
or an Authorised Distributor, the Manufacturer warrants such
installation shall be free from defects in material or workmanship
and that the Vendee shall be entitles to free service by the
Manufacturer or its Authorised Distributors to remedy any
such defect. Any service calls made by the Manufacturer or its
Authorised Distributors for the purpose of adjustments and, in
the opinion of the Manufacturer not to remedy a defect to which
this Warranty relates will be paid for by the Vendee.
B. (2) Where the door has not been installed by the Manufacturer
or its Authorised Distributor, in addition to any warranty offered
by the installer, the Manufacturer will within twelve (12) months
after the date of purchase and after notification of the defect
by the Vendee and on the return of the defective part of the
door repair or at its option, replace any defective part of the
door without charge provided disconnection, re-installation and
freight costs shall be borne by the Vendee.
C. Vendee to give Notification and Proof
The Vendee must immediately notify either the Manufacturer or
its Authorised Distributor in the event of any alleged defect in
the Unit and must establish to the reasonable satisfaction of the
Manufacturer or its Authorised Distributor the date of purchase
or installation (as the case may be) by way of invoice or the
completed Warranty Form contained in this Manual.
D. Future Modification
The Manufacturer reserves the right to modify any existing or
future models of the door without incurring any obligation to
incorporate such modifications in doors already manufactured or
to which this Warranty may relate.
E. General
Subject to paragraph F and G the obligations of the Manufacturer
or its Authorised Distributor under this Warranty are limited to
those contained above and this Warranty is the only warranty
made by the Manufacturer and exclusively and expressly in lieu
of all other warranties permitted to be excluded by law whether
these warranties are express, implied, under common law or by
statute and the terms of the warranty may not be modified by
person, firm or corporation other than the Manufacturer.
F. Exclusions
This Warranty does not extend to or affect the Manufacturer
or its Authorised Distributor in the event that any defects or
malfunctions of the Panel·Glide are due to or result from:
1. Lack of proper care or maintenance of the door.
2. Incorrect, improper or unreasonable use.
3. Faulty installation or adjustment which is not carried out by
the Manufacturer or its Authorised Distributor.
4. Failure to observe any instructions or directions provided with
the door or given to the Vendee by the installer.
5. Attempted modifications or repairs carried out by an
unauthorised person.
6. Faulty or unsuitable structures to which the Panel·Glide is
affixed.
G. Statutory Warranties
It is expressly provided that this Warranty or any terms and
conditions of it or any other literature provided to the Vendee
shall not be read or applied so as to purport to exclude, restrict or
modify or have the effect of so doing the application in relation
to the supply of the Unit of all or any of the provisions of division
2 and 2a of Part V of the Trade Practices Act, 1974 (the Act) as
amended or the exercise of a right conferred by such provision
or any liability of the Manufacturer or its Authorised Distributors
for breach of a condition or warranty implied by such provisions
or any other condition or warranty implied by any relevant State
Act or Territorian Ordinance or by the General Law and which
by law cannot be excluded, restricted or modified provided that
to the extent that the Act permits the Manufacturer to limit his
liability for a breach of a condition or warranty implied by the Act
then the Manufacturer’s liability for such breach shall be limited
to the payment of the cost of replacing or repairing the goods or
acquiring equivalent goods.
FINAL ADJUSTMENT
• IMPORTANT: Door must always be in the closed position
when adjusting the tension.
• Open and close door to check tension.
• If spring is over tensioned the door will not close
fully (Remedy – reduce spring tension, 1/4 decrements
advised).
• If spring is under tensioned door will be heavy to
lift. (Remedy - increase spring tension, 1/4 increments
advised).
NOTE: Always ensure that torque is taken up on winding
bar prior to releasing spring set screws.
• With the door in closed position loosen the track wall
brackets and move vertical tracks to adjust clearance from
the wall.
• Check all nuts and bolts for secure fastness.
NEVER PUT FINGERS BETWEEN PANELS WHEN
CLOSING DOOR.
Содержание Garage door
Страница 1: ...Panel Glide Installation Instructions...
