Glacier bay FSUZAS2721A1SA1, Инструкция по использованию и уходу

Страница: 8 / 30

Undermount Installation
HOMEDEPOT.COM/GLACIERBAY
8
Preparing the countertop
Preparing the cabinet
Position the template (provided with the sink) on the bottom of the
countertop, flush to the front and centered; secure with tape.
Trace the template and remove. Dry fit the sink to verify measurements.
Following the countertop manufacturer's instructions, carefully cut the
countertop on the traced line.
Construct a support frame to fit inside the cabinet opening. Provide
appropriate clearance for faucet, water supply lines, drain assembly,
garbage disposal and structural parts of the cabinet.
Apply painter's tape to the cabinets for marking and cutting purposes. This
will protect the cabinet from damage while cutting.
Outline the cutout on the front of the cabinet according to the actual sink.
Using a sharp saw blade, carefully cut the cabinet on the traced line.
NOTICE: lt is strongly suggested that you contact a professional
countertop fabricator when installing the sink as an undermount.
NOTICE: The cabinet must be installed, secured, plumb, and level
beffore installing the sink.
NOTICE: lt is recomncended to provide the cabinet maker with the actual
sink prior to cabinet fabrication. Before installing the sink, verify that the
distance from the top of the doors to the top of the cabinet is greater than
the apron front.
NOTICE: Double check the measurement of the cabinet cutout and make
any necessary adjustments by either adding filler strips or sanding the
opening.
NOTICE: A custom sink base cabinet and support framing is required for