22
GKD Technik Ltd
M3000007
Backward Stability
This machine is fitted with a backwards stability monitoring func�on to avoid the machine �pping
backwards when high boom angles are achieved with no load applied. The 3RCI+ system monitors the
posi�on of the front end equipment and will override backwards stability when the bucket pin is below a
preset height or when the load on the hook is sufficient to maintain stability. When the backwards
stability is overridden by the load on hook, the backwards stability icon will show on the screen to warn
the driver that the load should not be released in this posi�on.
Li� Point Selec�on
3RCI+ supports mul�ple li� points. If mul�ple li� points have been set up, from the
“Restrictions”
page,
press the bo�om le� bu�on to cycle through the available li� points.
Available options may include:
�
BP
(Bucket Pin)
�
ALP1
(Auxiliary Li� Point)
�
ALP2
(second Auxiliary Li� Point)
�
QH
(Quick hitch) assumes the Quick hitch is
Horizontal for purpose of Height and Radius
display
�
TLJB
(Tele jib)
The li� point in use is indicated on the RCI main
screen (item 5 on page 8) just above the load on
hook value.
Offset Boom / Swing Boom Machines
It should not be possible to perform li� opera�ons with an offset boom or swing boom machine unless
the boom is in the
“straight”
position. This position is detected generally by a proximity switch sensor,
and when the boom is detected as
“straight”
, normal li� du�es are allowed.
When the boom is not detected as
“straight”
, the 3RCI+ will impose a capacity restric�on of typically
700kg, to prevent poten�al overturns caused by forces imposed when li�ing with the boom in an offset
posi�on.