GKB HZ2001, Руководство пользователя

Страница: 41 / 81

GKB HZ2001 HD-SDI PTZ Camera
38
CLEAR AZIMUTH
ZERO This is used to delete the zero position settings
(see below).
Table 8
SET SCAN submenu
This includes a number of settings related to the programming of horizontal FRAME SCAN limits.
8) Press “
►
” on “ SET SCAN STOPS ”.
9) Press OPEN to confirm.
10) Go to the required position with the joystick to set the left scanning limit.
11) Press OPEN to confirm.
12) Go to the required position with the joystick to set the right scanning limit.
13) Press OPEN to confirm, Press CLOSE to cancel the operation.
14) Point the cursor “
►
” to “ CLEAR SCAN STOPS ” and press OPEN to delete the programmed
positions.
SET AZIMUTH ZERO submenu
This includes the settings related to programming of the pan zero position.
15)
Go to the required position with the joystick to set zero position.
16) Press OPEN to confirm; Press CLOSE to cancel the operation.
CLEAR AZIMUTH ZERO submenu
This includes the settings related to deleting the pan zero position.
17)
Press OPEN to confirm.
18) Press CLOSE to cancel the operation.