11
.1
Insert the MASTER key (red) into the lock (the key used for initial lock programming)
.2
A single fast blink of the green LED ( ) on the MASTER key (red) indicates the start of the key pairing and cancellation
process; Remove the key from the lock after the above indicated signal.
.3
Insert the new SUBSTITUTED USER KEY (black) with the identification card bearing the initials "CUS" in the lock
A single long blink of the green LED will flash ( ) to indicate the correct key combination; Remove the key from the lock
after the above signal has occurred.
.4
Insert the MASTER key (red) into the lock. A single long blink of the green LED will flash ( ) to indicate the end of the
pairing procedure; Remove the key from the lock after the above signal has occurred.
Caution: Inserting the USER keys (black) at this stage is only effective for lock programming. No key can open the lock until
the pairing procedure is complete.
✓
After the replacement process of the lost or damaged the USER key (black) will automatically be removed from the lock memory
and the SUBSTITUTE USER key (black) will be enabled when it is opened.
✓
DOWNLOAD KEY
In the event of loss or failure of one or more DOWNLOAD keys (blue), that inhibits the lock function of the paired key, you may be
prompted to replace the key (blue), but only by presenting the Key Identifier included with the key at the time of purchase.
1.1
Insert the MASTER key (red) into the lock (the key used for initial lock programming)
1.2
A single fast blink of the green LED ( ) on the MASTER key (red) indicates the start of the key pairing and cancellation
process; Remove the key from the lock after the above indicated signal.
1.3
Insert the new SUBSTITUTED DOWNLOAD KEY (blue) with the identification card bearing the initials "CDS" in the lock
A single long blink of the green LED will flash ( ) to indicate the correct key combination; Remove the key from the lock
after the above signal has occurred.
✓
After the replacement process of the lost or damaged the DOWNLOAD key (blue) will automatically be removed from the lock
memory and the SUBSTITUTE DOWNLOAD key (blue) will be enabled when it is opened.
KEY BATTERY
✓
We recommend to use DURACELL DL2430 batteries (2 batteries for each key)
✓
When the key batteries approach their end of life, they will be queued at the main signal (see the messages indicated in the
previous points) a double red LED blink ( )
✓
If "low battery" indication occurs at each use of the key, it is advisable to change the battery within the next 50 lock openings.
✓
All keys are equipped with an on-board clock that is only used if the Access Control feature is enabled on the lock using the
MASTER key; It is advisable to make the battery change within 2 minutes of the key opening in order to avoid the reset of the
internal clock. If more than the above times (2 minutes) pass, the clock synchronization with the Access Control Software must
be performed again.
