2
Water Shroud or Water guard for keeping off water prevent users wet their
hands and effect occupational hazards. Fabricators can use water shroud or
water guard depend on their needs. (Additional accessory)
Handles
R-handle
L-Handle
Assemble it in right or left side of tool.
Filling Oil from side handle
Take off sice handle and grease gear lubricating oil directly from the hole.
Fabricators can maintain the machine themselves, save maintenance cost
and extend duration of gear.
Water Regulator
Water regulator enables users to adjust frequency of water to proper speed
according to various needs of profiling.
Grip Throttle/Air Regulator
Grip throttle suits continuous operation, speed can be adjusted during
operating.
Air regulator enables users to adjust frequency of air to proper speed
according to various needs of profiling.
Safety Lever Throttle
Avoid users to press the trigger and start the tool carelessly. Just release the
safety lever and the tool will stop performing immediately. Lever throttle with
safety trigger ensures safety while stop operating, postitive speed control.
Grease Hole
Central Waterfeeding
There is a water exit with 3 holes on the spindle. A large
amount of water will spurt from the holes when profiling slab.
It creates high performance and reduce dust.Operators can
disassemble the water exit and clean it if it is choked up.
Содержание GPW-7
Страница 2: ......
