Gison Machinery GPW-7, Инструкция по эксплуатации

Страница: 8 / 12

6
CAUTION
˙
Prior to switching on, make sure that the tool is not in
contact with the work piece.
This may damage the work piece or cause personal
injury.
˙
When switching on, the operator should be positioned
away from the exposed portion of the disc.
Before polishing, perform a test run with the polisher. Take care to
ensure that no one is in the immediate area during the test run. During
the test run, make sure that the polisher is running normally and that
the disc is properly set.
Test Run Times

Disc Changes………………………………...More than 3 Minutes
 Start of Operations……………...……………………...1-2 minutes
WARNING
˙
Turn the switch off whenever polishing operations are
interrupted, discs are changed, after completion of
polishing, and when the air hose is to be disconnected.
˙
Use protective glasses while polishing.
˙
Handle your polisher with care. Improper contact with
other materials may cause damage to the disc or to the
polisher. Continuing polishing operations with cracked or
damaged discs is hazardous and could result in physical
injury. If the polisher is dropped, perform a test run before
resuming operation. Make sure that the tool is working
properly before continuing.