Description
The Model F200-1 Precision Sander has been designed to improve saw cut miters
to perfect 45˚ and other commonly used angles. After sanding the miters, the
result is a sharp seamless frame corner that is of professional quality. The Model
F200-1 Precision Sander is a precision tool and will give many years of service.
Producing professional quality picture frames is now easier than ever.
Instruction Manual
SANDER
Precision
P I C T U R E F R A M I N G
www.logangraphic.com
Model F200-1
Reference Part No. L689N
Rev. 12/08
Identification
Disk
- 10 lb. wheel which rotates in either direction for sanding.
Handle
- Handle to drive wheel.
Alignment Bar
- Fence stop that the frame lines up against for sanding. Rotates to three settings.
Micro-stops
- Alignment bar adjustments for perfect 45˚ angles.
Cleaning Bar
- Used to loosen built-up saw dust on sanding disk.
45˚ Triangle
- Used to fine tune micro-stops to 45˚.
Rabbet
- Undercut section of frame where framing material stacks onto.
90˚ Setting
- Hole for alignment bar to set at 90˚.
Logan Graphic Products Inc.
1100 Brown Street
Wauconda, IL 60084 USA
Toll Free 1 800 331 6232
Phone 1 847 526 5515
Toll Free Fax 1 800 331 6329
Fax 1 847 526 5155
www.logangraphic.com
